ARP Portable Compactor is capable of being transported from one location to another and placable at any place for the refuse collection, compaction and transferring. It will come as an integral unit incorporating the Container and the compaction unit.

The portable compactor will be such that can be lifted by a specially designed Hook Loader, unit mounted on a Truck Chassis for transportation and unloading of Compacted garbage.

One hydraulically operated tipping device mounted on compaction unit, to receive and unload the waste in to compaction unit to compact it in to the Container – which is called Tip Cart.

Future of Portable Compactors:

1. The Portable Compactor shall be of front loading type with a hydraulic operated device to receive waste from hand cart, tricycle vans and tippers etc.
2. The Portable Compactor shall be provided with leachate collection tray for collection of leachate during compaction of garbage & shall be with suitable drainage system to unload nearby drain. Leachate will not drop on road during transportation due to leak proof sealing at rear door.
3. The size of garbage chamber of the compaction unit shall be 1.90 cuM.
4. Compaction unit shall be powered by Hydraulic power unit, energy saving, low noise level and load sensing system.
5. Entire body shall be rectangular shape, for the easy discharge of waste and ensure complete filling.
6. Horizontal and vertical reinforcement to be provided on container body for better strength.
7. Compactor bottom should be flat with 200x100 ISMB long runners.
8. Door assembly shall have 180 degree swiveling movement. Door hinge to be mounted on top.
9. 04 nos. metallic roller to be provided for to avoid direct contact with garbage floor.
10. Automatic rear door locking arrangement shall be equipped with four cams located at four corners of the door to ensure zero leakage. All four cams shall be engaged with rear door by mechanical ratchet locking mechanism.
11. Automatic operated covering system, while loading of waste it opens up automatically and remain close when there is no loading.
12. The tip cart mechanism shall be equipped with DIN arm arrangement, which holds the tip cart positively while unloading the garbage in to the Corporation unit for 10.50 cum machine only.
13. All electro-hydraulic functions and working principal of machine shall be PLC based, monitoring operational conditions, during of operation, trouble shooting, loading percentage, periodic maintenance schedule etc. same shall be indicated on LCD screen when required and the same warned by visual or audible indicators.
14. Inspection door at one side of the compaction unit shall be provided; door shall be equipped with sensors to ensure the door is in closed condition while the compaction is in progress.
15. Hydraulic power pack shall be accommodated within the compaction unit and same shall be mounted on rails to maintenance & repair as &when required, from outside of the machine.
16. Control panel of operating system shall be equipped with start key & lock, display screen, emergency stop, main switch, connecting socket and operating push buttons.
17. The compactor shall operate only by a special key to protect the machine from unauthorized operation.
18. The compactor shall be equipped with hydraulic drive unit, protected in a separate tunnel, to ensure the daily operations in severe conditions.
19. All electrical circuits shall be enclosed in control box with starts & stop buttons according to IP65. etc.

Additional Information:  
Production Capacity: 10.5 to 20 cum.  
Delivery Time: 4 weeks after PO & Advance.  
Packaging Details: NA